Agri4All - Agri4All

Ritlee manufactures and supply a wide range of Agricultural Equipment and Machinery specifically suited to the Southern African climate and agricultural needs. All our products undergo rigorous testing and research to ensure they meet the requirements needed.

Compost Turner – Tractor Mounted -TM3 3 x 1,5-meter rows

· Is a 3-point tractor-mounted compost turner.

· Processing rows 3 meters x 1,5 meters high and of any length,

· Uses 12 mm thick professionally and dynamically balanced drum. (The body doesn't shake when turning the compost.)

· Uses Bennox Steel spatula blades of specific size simple shape and all the same weight. Angle mounted with 90 deg mounting support for best breakup, lift of compost, fluffing compost and replacing old air with new fresh oxygen-laden air. This all done without breaking blades because of weighty overload! which also is detrimental to gearbox.

· Composter turns 675 cubic meters per hour at 300 meters per hour ground speed. This is the speed of the crawler gear on a tractor at 1700 rpm which customers must please have.

· TM3 Compost turner has a water application dragline attachment point with piping directed exactly to centre of housing immediately above the compost row being turned so that all water is turned in without overflow/run-off.

Compost Turner Ritlee TM3

Tractor mounted, model TM3 (Compost Mixer, compost turner)

Our TM3 compost turner is a very stable, virtually no vibration, efficient, low torque used, durable, tractor-mounted mixer/slicer/oxygenator/fluffer.

TM3 Compost Turner Specifications & Requirements for composting

Ritlee TM3 compost turner supplied with, as standard!

· Supplied with 2 PTO shafts (1x with slip clutch)

· Has 50 mm water hose clamp with water connection

· Has a centrally located applicator hole mid mounted in turner housing.

· Water exit on compost row is located immediate above compost row being turned — Mixes water in immediately throughout row of compost. (Ideal 60% moisture content)

· Hydraulic hose connectors to your tractor coupling point for hydraulic lift & lower of turner rotor.

· Rubber curtains to contain ‘flying’ objects therefore make turned rows look neat.

· Application tank with dropping boom with on/off control — This is an optional.

· Tractor coupler mounted at weight section of tractor then stabilizer bar specially measured and welded with turnbuckles for ideal tensioning and line up of turner.

Click HERE to view the product.