Discover the CR10 & CR11, two revolutionary new combines designed to boost output, protect grain quality, minimise losses and reduce total cost of harvesting.
This is so much more than an extension of the proven and established CR range, it represents a whole new level of harvesting, resulting from many years of development to produce the most profitable design for you.
READY FOR NEW CHALLENGES
New Holland knows how tough harvest can be – and when you’re farming on the largest scale, the challenges are multiplied. Short weather windows. Big areas to cover. High fuel costs.
We have a heritage of helping you overcome those challenges, with combine designs that bring new ideas, more capacity, greater efficiency, each offering a step change in performance.
Never before, though, have we offered a leap forward quite like this one.
A NEW LEVEL OF PRODUCTIVITY
The new CR10 & CR11 combines are our answer to the challenges not just of today, but tomorrow too. Under the skin, this is a beast that blends the biggest of appetites with technology designed to minimise losses, protect grain quality premiums, keep running costs low, and leave your fields in the best condition for the next season. We have rethought the way combines are designed, creating a totally new architecture and driveline that means the new CR10 & CR11 are in a different league, even when compared against the proven efficiencies of the established New Holland CR combine that broke the harvesting record in 2014 with the CR10.90.
At the heart of the CR10 & CR11 is Cursor C16 engine from FPT Industrial, fine-tuned to provide an enormous 775hp and a C13 developing 634hp on the CR10 , ensuring this is a machine that can cope whatever the crop volume, straw ripeness, or hill it is facing. From crop intake to offloading, it is designed to not just cope, but master the task. It deals effortlessly with incoming crop, powering 24-inch rotors in a wider and longer threshing compartment, feeding a 20,000 litre grain tank on the CR11 and a 16,000 litre on the CR10, and unloading crop at a rapid 210l/s. Whatever cropping challenge, with the CR11 there is very little that will stop you.
GRAIN SAVING
High performance shouldn’t come at the price of higher losses. That’s why the goal of New Holland engineers was to create a combine with a minimum grain loss. The CR10 & CR11’s new Twin Clean™ cleaning shoe incorporates two cleaning systems that run concurrently, with two upper sieves, two lower sieves, two clean grain augers and two sets of pressure sensors to measure cleaning shoe load. An industry first, the new Twin Clean is fully automated to guarantee even cross-distribution of the cleaning shoe, for maximum capacity at loss levels close to zero.
But saving grain is one thing, protecting grain quality is quite another. New Holland’s long-established and well-proven Twin Rotor™ technology means grain quality is ‘ingrained’ in our DNA. Thanks to the grain on grain threshing and a straight crop flow into the rotors that ensures the CR10 & CR11 retains the well earned reputation of CR combines for gentle grain handling and the lowest levels of damage, ensuring a quality sample and further limiting losses. And to extend this even further, the CR10 & CR11 combines can be specified with NutriSense™ sensor technology, allowing full monitoring of the grain sample according to factors such as moisture and protein, allowing crops to be stored and sold by quality to help maximise your income.
RESIDUE MANAGEMENT
The CR10 & CR11 feature a completely new residue management system featuring a new chopper and spreader package, designed to ensure the best chop quality and even residue distribution over the full possible cutting width of the CR11 – up to 18m (60ft). The award-winning IntelliSpread™ radar automates the spreading control to ensure full and even residue coverage behind the combine, regardless of wind effects, crop type or moisture conditions.
MAX UPTIME
New Holland knows the crucial harvesting period is always shorter than ideal, and your combine needs to operate at its full potential as much as possible. That’s why the new CR10 & CR11 have been designed specifically to keep downtime to a minimum. Maintenance time is minimised thanks to a simple driveline, with fewer drive components, no drive chains, and ideal access to every component. As you would expect from New Holland, all operating parameters can be set and controlled from the cab. Even the stone trap is emptied remotely. In the case of the unlikely happening and that a blockage occurs, the new CR10 & CR11 also feature the ability to automatically unplug the combine’s internals from the feeder to the rotors without leaving the cab.
MODERN STYLING
You can’t miss the revolutionary aesthetics of the new CR10 & CR11.
Thanks to close collaboration between New Holland’s Industrial Design and Engineering teams, this is clearly a very different combine to the established CR range. From the ‘harvest flow’ of the side-panel styling to the striking rear hood, it’s clear from the outside that this is a very different combine on the inside. This is a machine that is clearly something special. This is style that hides significant substance.
Ontdek die CR10 & CR11, twee rewolusionêre nuwe stropermodelle wat ontwerp is om opbrengs te verhoog, graankwaliteit te beskerm, verliese te beperk en die totale koste van oes te verminder.
Dit is baie meer as net ’n uitbreiding van die beproefde en gevestigde CR-reeks – dit verteenwoordig ’n heeltemal nuwe vlak van oes, die resultaat van jare se ontwikkeling om die winsgewendste ontwerp vir jou plaas te skep.
GEREED VIR NUWE UITDAGINGS
New Holland verstaan hoe uitdagend oes kan wees – en hoe groter jou besigheid, hoe meer word daardie uitdagings verdubbel. Kort weervensters. Groot oppervlaktes om te dek. Stygende brandstofkoste.
Ons het ’n lang geskiedenis daarvan om boere te help om hierdie uitdagings te oorkom, met stropers wat nuwe idees, hoër kapasiteit en beter doeltreffendheid bring – elke keer met ’n sprong vorentoe in werkverrigting. Nog nooit tevore het ons egter so ’n groot sprong gemaak soos nou nie.
’N NUWE VLAK VAN PRODUKTIWITEIT
Die nuwe CR10 & CR11 stropers is ons antwoord op die uitdagings van vandag en môre. Onder die enjinkap is dit ’n ware werkesel wat groot kapasiteit kombineer met tegnologie wat verliese beperk, graankwaliteit beskerm, bedryfskoste laag hou en jou lande in die beste moontlike toestand vir die volgende seisoen laat. Ons het die manier waarop stropers ontwerp word, heeltemal herbedink en ’n nuwe argitektuur en aandryfstelsel geskep wat maak dat die CR10 & CR11 in ’n ander klas is – selfs in vergelyking met die CR10.90 wat in 2014 die wêreldrekord vir oes opgestel het. In die hart van die CR10 & CR11 klop FPT Industrial se Cursor C16-enjin wat ’n indrukwekkende 775 perdekrag lewer, en die CR10 se C13-enjin lewer 634 perdekrag. Dit verseker dat hierdie stroper enige uitdaging baasraak – of dit nou groot oesvolumes, strooirypheid of steiltes is. Van inname tot aflaai is alles ontwerp om nie net te hanteer nie, maar te bemeester: 24-duimrotors in ’n wyer en langer dorskompartement, ’n 20 000 liter-graantenk op die CR11 (16 000 liter op die CR10), en ’n vinnige aflaaispoed van 210 ℓ/s. Daar is min wat jou kan stuit wanneer jy met ’n CR11 stroop.
GRAANBESPARING
Hoë werkverrigting mag nooit teen die prys van hoër verliese kom nie. Daarom was New Holland se ingenieurs se doel om ’n stroper te ontwikkel wat minimum graanverlies het. Die CR10 & CR11 se nuwe Twin Clean™-skoonmaakskoen inkorporeer twee volledige skoonmaakstelsels wat gelyktydig werk – met twee bo-sifde, twee onder-sifde, twee skoon graan-skroewe en twee stelle druksensors wat die las meet. ’n Industrie-eerste, die nuwe Twin Clean is volledig outomaties en verseker eweredige verspreiding van materiaal in die skoonmaakskoen vir maksimum kapasiteit met byna nul verliese.
Maar om graan te spaar is een ding – om graan se kwaliteit te beskerm is nog iets. New Holland se beproefde Twin Rotor™-tegnologie sorg vir sagte graanhantering en die laagste beskadigingsvlakke. Graan-op-graan-dors en ’n reguit vloei van gewasmateriaal verseker ’n topkwaliteit monster en nog minder verliese. Die CR10 & CR11 kan ook met NutriSense™-sensor tegnologie toegerus word om die graanmonster se vog en proteïen te monitor. Dit help om gewasse volgens kwaliteit te stoor en te verkoop om jou inkomste te maksimeer.
RESIDU-BESTUUR
Die CR10 & CR11 beskik oor ’n heeltemal nuwe residubestuursisteem met ’n nuut ontwerpte kapper en verspreider wat egalige verspreiding tot oor die volle snywydte van tot 18 m (60 vt) verseker.
Die bekroonde IntelliSpread™-radar outomatiseer die verspreiding en verseker konsekwente bedekking agter die stroper, ongeag wind, gewas of vogtoestande.
MAKSIMUM BESKIKBAARHEID
New Holland weet dat die oesseisoen altyd korter is as wat ’n mens sou wou hê – daarom is die CR10 & CR11 ontwerp om stilstand tot ’n minimum te beperk. Onderhoud is vinniger danksy ’n eenvoudige aandryfstelsel met minder komponente, geen kettings nie, en maklike toegang tot elke onderdeel.
Soos verwag kan word, kan al die bedryfsparameters vanuit die kajuit gestel en beheer word – selfs die klipval kan op afstand gegooi word. Indien ’n blokkasie sou voorkom, kan die CR10 & CR11 die hele stroper – van voerinvoer tot by die rotors – outomaties ontblok, sonder dat die operateur die kajuit hoef te verlaat.
MODERNE ONTWERP
Die nuwe CR10 & CR11 het ’n opvallende nuwe estetika wat nie misgekyk kan word nie.
Dank sy die noue samewerking tussen New Holland se Industriële Ontwerp- en Ingenieurspanne is dit duidelik dat hierdie ’n ander klas stroper is. Van die vloeiende sy-panele tot die indrukwekkende agterste kap, dit is duidelik van buite dat hierdie stroper van binne net so spesiaal is. Hierdie is styl wat groot inhoud wegsteek.
Klik HIER om meer oor die CR10 & CR11 te lees Kontak vandag jou naaste New Holland-handelaar of
<p><strong style="color: rgb(0, 71, 178);">NEXT LEVEL OF HARVESTING EXPANDED CR10 & CR11</strong></p><p><strong style="color: rgb(0, 71, 178);">THE NEXT LEVEL OF HARVESTING</strong></p><p>Discover the CR10 & CR11, two revolutionary new combines designed to boost output, protect grain quality, minimise losses and reduce total cost of harvesting.</p><p>This is so much more than an extension of the proven and established CR range, it represents a whole new level of harvesting, resulting from many years of development to produce the most profitable design for you.</p><p><strong style="color: rgb(0, 71, 178);">READY FOR NEW CHALLENGES</strong></p><p>New Holland knows how tough harvest can be – and when you’re farming on the largest scale, the challenges are multiplied. Short weather windows. Big areas to cover. High fuel costs.</p><p>We have a heritage of helping you overcome those challenges, with combine designs that bring new ideas, more capacity, greater efficiency, each offering a step change in performance.</p><p>Never before, though, have we offered a leap forward quite like this one.</p><p><strong style="color: rgb(0, 71, 178);">A NEW LEVEL OF PRODUCTIVITY</strong></p><p>The new CR10 & CR11 combines are our answer to the challenges not just of today, but tomorrow too. Under the skin, this is a beast that blends the biggest of appetites with technology designed to minimise losses, protect grain quality premiums, keep running costs low, and leave your fields in the best condition for the next season. We have rethought the way combines are designed, creating a totally new architecture and driveline that means the new CR10 & CR11 are in a different league, even when compared against the proven efficiencies of the established New Holland CR combine that broke the harvesting record in 2014 with the CR10.90.</p><p>At the heart of the CR10 & CR11 is Cursor C16 engine from FPT Industrial, fine-tuned to provide an enormous 775hp and a C13 developing 634hp on the CR10 , ensuring this is a machine that can cope whatever the crop volume, straw ripeness, or hill it is facing. From crop intake to offloading, it is designed to not just cope, but master the task. It deals effortlessly with incoming crop, powering 24-inch rotors in a wider and longer threshing compartment, feeding a 20,000 litre grain tank on the CR11 and a 16,000 litre on the CR10, and unloading crop at a rapid 210l/s. Whatever cropping challenge, with the CR11 there is very little that will stop you.</p><p><strong style="color: rgb(0, 71, 178);">GRAIN SAVING</strong></p><p>High performance shouldn’t come at the price of higher losses. That’s why the goal of New Holland engineers was to create a combine with a minimum grain loss. The CR10 & CR11’s new Twin Clean™ cleaning shoe incorporates two cleaning systems that run concurrently, with two upper sieves, two lower sieves, two clean grain augers and two sets of pressure sensors to measure cleaning shoe load. An industry first, the new Twin Clean is fully automated to guarantee even cross-distribution of the cleaning shoe, for maximum capacity at loss levels close to zero.</p><p>But saving grain is one thing, protecting grain quality is quite another. New Holland’s long-established and well-proven Twin Rotor™ technology means grain quality is ‘ingrained’ in our DNA. Thanks to the grain on grain threshing and a straight crop flow into the rotors that ensures the CR10 & CR11 retains the well earned reputation of CR combines for gentle grain handling and the lowest levels of damage, ensuring a quality sample and further limiting losses. And to extend this even further, the CR10 & CR11 combines can be specified with NutriSense™ sensor technology, allowing full monitoring of the grain sample according to factors such as moisture and protein, allowing crops to be stored and sold by quality to help maximise your income.</p><p><strong style="color: rgb(0, 71, 178);">RESIDUE MANAGEMENT</strong></p><p>The CR10 & CR11 feature a completely new residue management system featuring a new chopper and spreader package, designed to ensure the best chop quality and even residue distribution over the full possible cutting width of the CR11 – up to 18m (60ft). The award-winning IntelliSpread™ radar automates the spreading control to ensure full and even residue coverage behind the combine, regardless of wind effects, crop type or moisture conditions.</p><p><strong style="color: rgb(0, 71, 178);">MAX UPTIME</strong></p><p>New Holland knows the crucial harvesting period is always shorter than ideal, and your combine needs to operate at its full potential as much as possible. That’s why the new CR10 & CR11 have been designed specifically to keep downtime to a minimum. Maintenance time is minimised thanks to a simple driveline, with fewer drive components, no drive chains, and ideal access to every component. As you would expect from New Holland, all operating parameters can be set and controlled from the cab. Even the stone trap is emptied remotely. In the case of the unlikely happening and that a blockage occurs, the new CR10 & CR11 also feature the ability to automatically unplug the combine’s internals from the feeder to the rotors without leaving the cab.</p><p><strong style="color: rgb(0, 71, 178);">MODERN STYLING</strong></p><p>You can’t miss the revolutionary aesthetics of the new CR10 & CR11.</p><p>Thanks to close collaboration between New Holland’s Industrial Design and Engineering teams, this is clearly a very different combine to the established CR range. From the ‘harvest flow’ of the side-panel styling to the striking rear hood, it’s clear from the outside that this is a very different combine on the inside. This is a machine that is clearly something special. This is style that hides significant substance.</p><p>Click <a href="https://agriculture.newholland.com/en-gb/europe/products/combine-harvesters/cr10-and-cr11" rel="noopener noreferrer" target="_blank">HERE</a> to read more about CR10 & CR11.</p><p>Contact your nearest New Holland dealer today or</p><p><strong>Jaco du Preez:</strong></p><p><a href="Tel: +27825248898" rel="noopener noreferrer" target="_blank">+27825248898</a></p><p>Chat with us directly on <a href="https://api.whatsapp.com/send/?phone=27825248898&text=Hi%2C+I+am+interested+in+the+product+mentioned+https://agri4all.com/product/cr10-cr11-combines-next-level-harvesting-with-new-holland-south-africa" rel="noopener noreferrer" target="_blank">WhatsApp</a> - it’s quick and easy.</p><p><a href="mailto:[email protected]" rel="noopener noreferrer" target="_blank">[email protected]</a></p><p><a href="https://agriculture.newholland.com/africa/en-za" rel="noopener noreferrer" target="_blank">New Holland website</a></p><p><a href="https://www.facebook.com/NewHollandAGSouthAfrica" rel="noopener noreferrer" target="_blank">New Holland Facebook page</a></p><p>14 Industrie street, Isando, 1600, South Africa</p><p><br></p><p><strong style="color: rgb(0, 71, 178);">VOLGENDE VLAK VAN OES – UITGEBREIDE CR10 & CR11</strong></p><p><strong style="color: rgb(0, 71, 178);">DIE VOLGENDE VLAK VAN OES</strong></p><p>Ontdek die CR10 & CR11, twee rewolusionêre nuwe stropermodelle wat ontwerp is om opbrengs te verhoog, graankwaliteit te beskerm, verliese te beperk en die totale koste van oes te verminder.</p><p>Dit is baie meer as net ’n uitbreiding van die beproefde en gevestigde CR-reeks – dit verteenwoordig ’n heeltemal nuwe vlak van oes, die resultaat van jare se ontwikkeling om die winsgewendste ontwerp vir jou plaas te skep.</p><p><strong style="color: rgb(0, 71, 178);">GEREED VIR NUWE UITDAGINGS</strong></p><p>New Holland verstaan hoe uitdagend oes kan wees – en hoe groter jou besigheid, hoe meer word daardie uitdagings verdubbel. Kort weervensters. Groot oppervlaktes om te dek. Stygende brandstofkoste.</p><p>Ons het ’n lang geskiedenis daarvan om boere te help om hierdie uitdagings te oorkom, met stropers wat nuwe idees, hoër kapasiteit en beter doeltreffendheid bring – elke keer met ’n sprong vorentoe in werkverrigting. Nog nooit tevore het ons egter so ’n groot sprong gemaak soos nou nie.</p><p><strong style="color: rgb(0, 71, 178);">’N NUWE VLAK VAN PRODUKTIWITEIT</strong></p><p>Die nuwe CR10 & CR11 stropers is ons antwoord op die uitdagings van vandag en môre. Onder die enjinkap is dit ’n ware werkesel wat groot kapasiteit kombineer met tegnologie wat verliese beperk, graankwaliteit beskerm, bedryfskoste laag hou en jou lande in die beste moontlike toestand vir die volgende seisoen laat. Ons het die manier waarop stropers ontwerp word, heeltemal herbedink en ’n nuwe argitektuur en aandryfstelsel geskep wat maak dat die CR10 & CR11 in ’n ander klas is – selfs in vergelyking met die CR10.90 wat in 2014 die wêreldrekord vir oes opgestel het. In die hart van die CR10 & CR11 klop FPT Industrial se Cursor C16-enjin wat ’n indrukwekkende 775 perdekrag lewer, en die CR10 se C13-enjin lewer 634 perdekrag. Dit verseker dat hierdie stroper enige uitdaging baasraak – of dit nou groot oesvolumes, strooirypheid of steiltes is. Van inname tot aflaai is alles ontwerp om nie net te hanteer nie, maar te bemeester: 24-duimrotors in ’n wyer en langer dorskompartement, ’n 20 000 liter-graantenk op die CR11 (16 000 liter op die CR10), en ’n vinnige aflaaispoed van 210 ℓ/s. Daar is min wat jou kan stuit wanneer jy met ’n CR11 stroop.</p><p><strong style="color: rgb(0, 71, 178);">GRAANBESPARING</strong></p><p>Hoë werkverrigting mag nooit teen die prys van hoër verliese kom nie. Daarom was New Holland se ingenieurs se doel om ’n stroper te ontwikkel wat minimum graanverlies het. Die CR10 & CR11 se nuwe Twin Clean™-skoonmaakskoen inkorporeer twee volledige skoonmaakstelsels wat gelyktydig werk – met twee bo-sifde, twee onder-sifde, twee skoon graan-skroewe en twee stelle druksensors wat die las meet. ’n Industrie-eerste, die nuwe Twin Clean is volledig outomaties en verseker eweredige verspreiding van materiaal in die skoonmaakskoen vir maksimum kapasiteit met byna nul verliese.</p><p>Maar om graan te spaar is een ding – om graan se kwaliteit te beskerm is nog iets. New Holland se beproefde Twin Rotor™-tegnologie sorg vir sagte graanhantering en die laagste beskadigingsvlakke. Graan-op-graan-dors en ’n reguit vloei van gewasmateriaal verseker ’n topkwaliteit monster en nog minder verliese. Die CR10 & CR11 kan ook met NutriSense™-sensor tegnologie toegerus word om die graanmonster se vog en proteïen te monitor. Dit help om gewasse volgens kwaliteit te stoor en te verkoop om jou inkomste te maksimeer.</p><p><strong style="color: rgb(0, 71, 178);">RESIDU-BESTUUR</strong></p><p>Die CR10 & CR11 beskik oor ’n heeltemal nuwe residubestuursisteem met ’n nuut ontwerpte kapper en verspreider wat egalige verspreiding tot oor die volle snywydte van tot 18 m (60 vt) verseker.</p><p>Die bekroonde IntelliSpread™-radar outomatiseer die verspreiding en verseker konsekwente bedekking agter die stroper, ongeag wind, gewas of vogtoestande.</p><p><strong style="color: rgb(0, 71, 178);">MAKSIMUM BESKIKBAARHEID</strong></p><p>New Holland weet dat die oesseisoen altyd korter is as wat ’n mens sou wou hê – daarom is die CR10 & CR11 ontwerp om stilstand tot ’n minimum te beperk. Onderhoud is vinniger danksy ’n eenvoudige aandryfstelsel met minder komponente, geen kettings nie, en maklike toegang tot elke onderdeel.</p><p>Soos verwag kan word, kan al die bedryfsparameters vanuit die kajuit gestel en beheer word – selfs die klipval kan op afstand gegooi word. Indien ’n blokkasie sou voorkom, kan die CR10 & CR11 die hele stroper – van voerinvoer tot by die rotors – outomaties ontblok, sonder dat die operateur die kajuit hoef te verlaat.</p><p><strong style="color: rgb(0, 71, 178);">MODERNE ONTWERP</strong></p><p>Die nuwe CR10 & CR11 het ’n opvallende nuwe estetika wat nie misgekyk kan word nie.</p><p>Dank sy die noue samewerking tussen New Holland se Industriële Ontwerp- en Ingenieurspanne is dit duidelik dat hierdie ’n ander klas stroper is. Van die vloeiende sy-panele tot die indrukwekkende agterste kap, dit is duidelik van buite dat hierdie stroper van binne net so spesiaal is. Hierdie is styl wat groot inhoud wegsteek.</p><p>Klik <a href="https://agriculture.newholland.com/en-gb/europe/products/combine-harvesters/cr10-and-cr11" rel="noopener noreferrer" target="_blank">HIER</a> om meer oor die CR10 & CR11 te lees Kontak vandag jou naaste New Holland-handelaar of</p><p><strong>Jaco du Preez: </strong></p><p><a href="Tel: +27825248898 " rel="noopener noreferrer" target="_blank">+27825248898 </a></p><p>Gesels direk met ons op <a href="https://api.whatsapp.com/send/?phone=27825248898&text=Hi%2C+I+am+interested+in+the+product+mentioned+https://agri4all.com/product/cr10-cr11-combines-next-level-harvesting-with-new-holland-south-africa" rel="noopener noreferrer" target="_blank">WhatsApp</a> - dit is vinnig maklik.</p><p><a href="mailto:[email protected]" rel="noopener noreferrer" target="_blank">[email protected]</a></p><p><a href="https://agriculture.newholland.com/africa/en-za" rel="noopener noreferrer" target="_blank">New Holland webwerf </a></p><p><a href="https://www.facebook.com/NewHollandAGSouthAfrica" rel="noopener noreferrer" target="_blank">New Holland Facebook-bladsy</a></p><iframe class="ql-video" frameborder="0" allowfullscreen="true" src="https://www.youtube.com/embed/Z1U6kc-EtOA?showinfo=0"></iframe><p><br></p><p>Industriestraat 14, Isando, 1600, Suid-Afrika</p>
